Design Juicer Pro User Manual

Step 4:
Raise the safety locking arm straight up and
lock into the two grooves on both sides of
the juicer cover. The safety locking arm
should now be in a vertical position and
locked into place on top of the juicer cover
(picture 4).
IMPORTANT: If the safety locking arm is
not in the right position the motor will not
start moving.
Secure the safety arm by lifting it into the
two grooves of the cover (picture 4a).
Step 5:
Slide the food pusher down the feed chute
by aligning the groove of the food pusher
with the small protrusion on the inside
of the top of the feed chute. Continue to
slide the food pusher down the feed chute
(picture 5a).
4
4a
5a
Food
Pusher
Groove
42 43