Design Juicer Pro User Manual

DISASSEMBLING YOUR DESIGN JUICER
WARNING: Always turn the appliance
off and pull the plug when the appliance
is not in use or when disassembling,
moving or cleaning the appliance. Never
let water or other liquids run into the motor
block. Never clean the power cord or the
motor block in the dishwasher, pour liquids
over the appliance or douse or dip it in
water or other liquids.
Step 1:
Push the ›ON/OFF‹ button on the juicer
to ›OFF‹ and then switch off at the power
outlet and unplug.
IMPORTANT: Wait for the filter basket
to stop spinning before continuing to step
2 Carefully remove the pulp container by
tilting the pulp container slightly to the right
and unlatch it from under the juicer cover
and the container support extending from
under the motor base (picture 1).
Step 2:
Pull the locking arm back over the grooves
on both side of the juicer cover (picture
2/3). Move the locking arm down.
Step 3:
Lift the juicer cover off the juicer (picture 4).
1
2
3
4
46