Design Juicer Pro User Manual

TO CLEAR BLOCKAGE

When juicing hard or stringily fruit or vegetables, or if you push down the food pusher too

fast or with too much pressure or the juicing is too vigorous, wet pulp can build up under

the juicer cover or the motor appears to stall when juicing. Wet pulp would block the fine

mashes of the filter basket. Try slower juicing by pushing the food pusher down more slowly.

Follow Disassembling and Cleaning instructions and clean the filter bowl surround, the stain-

less steel filter basket and the juicer cover.

1. Turn the appliance off, wait for the motor to stop moving and pull the plug.

2. Disassemble the appliance according to the instructions.

WARNING: Do not touch blades when handling the filter basket.

3. Remove residue of food on the filter basket with a small wooden or plastic spoon.

4. Assemble the appliance according to the instructions and continue juicing.

5. If another blockage occurs clean the appliance according to the instruction ›Care and

Cleaning‹.

To avoid further blockage:

• When juicing hard or stringily fruit or vegetables choose high speed.

• Remove very hard and stringily elements such as stalks and stems.

• Try slower juicing by pushing the food pusher down more slowly.

• Avoid overloading pulp in the pulp container. The pulp has to be able to fall easily and

unhindered into the pulp container.

• Try other fruit and vegetables.