Design Food Processor User Manual

7. Feed the food into the feed chute and cover the feed chute with the food pusher on top.

WARNING: Do not push products into the feed chute with your fingers or foreign

objects. Always use the food pusher provided. While proceeding do not push the food

pusher too hard down.

8. Connect the power plug to a suitable wall power outlet.

9. Start the appliance pressing the ´ON` button. The motor starts working, the food is getting

processed and gathered at the base of the bowl. While proceeding do not push the food

pusher too hard down to avoid overloading the motor. If the motor stalls or stucks during

operation or if the fibre of the food blocks the blade, immediately turn `OFF` the appliance

and unplug the power connector. Check whether there is any obstruction in the container,

and remove it (see ‘Care and Cleaning’).

WARNING: With the blade mounted in the container, do not insert your fingers in the

container. Always use a wooden or plastic spoon or similar cooking utensils for filling in

and taking out your food.

ATTENTION: Do not use the appliance in continuous operation for more than 3 minutes to

avoid overheating. If processing large quantities of food, regularly interrupt operation

and unplug the appliance for at least 1 minute, to let the motor cool down.

WARNING: Do not overfill the container. Possibly, take some food out of the container,

using a wooden or plastic spoon, before starting the appliance again.

11. Turn the appliance off and pull the plug when the appliance is not in use and you

finished the operation.

12. Empty the bowl. Clean the appliance in accordance to the instructions in chapter

‘Care and Cleaning’. Do not leave any food dry on the surfaces of the appliance.

Tips for preparing the food

• Remove uneatable and hard parts of the food: stalks, skins and shells, seeds, bones,

gristle, and tendons. Peal tomatoes before processing.

• Dry herbs before processing. Otherwise the ingredients could go lumpy. Use the

universal chopping blade for chopping herbs and leafy vegetables.

• When processing vegetable or fruit cut the food in size to fit the feed chute. Cut

cucumber and zucchini lengthwise for example.

• Place carrots and simular roots tip facing down in the feed chute.

Chopping

The universal chopping blade speeds up many everyday tasks and is designed to chop,

crumb, grind, mince and mix quickly.

40962_foodprocessor_manual_mai07.qxp 18.07.2007 10:38 Seite 34