Design Food Processor User Manual

Using the ´Pulse` function you can mix the dough and batter slowly. This function is working
in interval and the motor stops running as soon as you release the ´Pulse` button. Repeat
pressing the button as often as necessary or keep the button pressed down.
ATTENTION: Do not use the appliance in continuous operation for more than 3 minutes
to avoid overheating. If processing large quantities of food, regularly interrupt operation
and unplug the appliance for at least 1 minute, to let the motor cool down.
WARNING: Do not overfill the container. Possibly, take some food out of the container,
using a wooden or plastic spoon, before overloading the motor.
7. When your dough or batter is ready, turn the appliance off and pull the plug when
the appliance is not in use and you finished the operation.
8. Empty the bowl. Clean the appliance in accordance to the instructions in chapter
‘Care and Cleaning’. Do not leave any food dry on the surfaces of the appliance.
Care and Cleaning
WARNING: To avoid injury to persons and damage, always turn the appliance ´OFF`, wait
for the motor to stop completely and unplug the appliance, immediately after operation
and before assembling/disassembling or cleaning the appliance. The blades and discs
are very sharp! Do not touch the blades or discs. To handle the blades, always hold on
to the plastic parts.
CAUTION: DO NOT place the appliance or any part of it in an automatic dishwasher or
pour boiling water over it. Do not immerse the motor or power cord in any liquids or spill any
liquids on it or place the motor on wet surfaces. Always wipe off spilled liquids immediately.
Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants, bleach)
or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could damage
the surfaces. Always handle the entire appliance with care and without violence.
Soak stubborn residues on the bowl, lid, blade or disc in warm dish-water for ca. 10
minutes and then remove the residues with a nylon washing brush or sponge. These
parts are dishwasher safe and can be cleaned in the dishwasher as well.
1. Release the ´OFF` button, wait for the motor to stop completely, and unplug the
appliance from the power outlet.
ATTENTION: Never use force dissembling the appliance. The lid and the bowl are
securely locked during operation and can be released turning them clockwise. You can
only take the bowl off the motorblock when you remove the lid first. Otherwise the lid and
the bowl are securily locked on the motorblock.
2. Take the lid of the bowl turning it 1/6 turn clockwise and take the lid of the bowl.
WARNING: The blades and discs are very sharp. Pay attention when handling the blade.
Only touch the blade on the edge and handle with care when cleaning.
3. Pull the used supplies upright for disassembling.
38
40962_foodprocessor_manual_mai07.qxp 18.07.2007 10:38 Seite 38