Design Food Processor User Manual

from inadmissible strain (i.e. mechanical or electric shock, overheating, frost, moisture)
and where young children cannot reach it.
• Operate the appliance on a well accessible, stable, level, dry, and suitable large surface.
Do not place the appliance or any part of it on or near hot surfaces (heater, gas burner,
grill, or oven). Do not place the appliance near the edge of the table or counter or on
inclined or wet surfaces or where it can fall. Keep the entire appliance away from direct
sunlight and sharp edges.
• Always IMMEDIATELY turn the appliance ´OFF`, wait for the slicing and shredding
disc or blade to stop completely, and then unplug the appliance, if the appliance is not
in use (even for a short break) and before assembling, disassembling or cleaning.
• Do not push products into the feed chute with your fingers or foreign objects. Always
use the food pusher provided. While proceeding do not push the food pusher too hard down.
• Do not immerse the motor housing or power cord in water or any other liquid. Do
not pour or drip any liquids on the motor housing or power cord. When liquids are spilled
on the motor housing, immediately unplug the appliance and dry the motor housing to
avoid risk of electric shock or fire. Do not attempt to operate the appliance, when liquids are
on or in the motor housing.
• Do not place the appliance in an automatic dishwasher!
• To avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e.
disinfectants, bleach) or cleaning pads for operation or cleaning. Do not use any hard
or sharp utensils for operation or cleaning.
• The appliance is intended for cutting and chopping food. Do not use the appliance for
any other purpose. Do not chop extremely hard food, such as ice, coffee beans or nutmeg.
• Before use, always make sure that the appliance is assembled properly and completely
(see Operation). Do not leave any food dry on the surfaces of the appliance. Always
handle the entire appliance and all parts of it with care and without violence.
• Always make sure the appliance is properly and completely assembled before connecting to
power outlet and operating. The unit will not turn ‘ON’ unless properly assembled.
• Reparation and technical maintenance of the appliance or line cord are just allowed
to be accomplished by an authorised specialist reparation shop.
• Do not use the appliance if it is damaged or units of the appliance are damaged. Do
not use the appliance if it does not function properly or if it was excessively loaded.
The appliance is likely damaged if the appliance or units of the appliance show cracks,
exorbitant wearing down, alterations or leaks. It is also likely damaged if the drive wheel of the
motorblock moves slowly. Take the appliance for technical maintenance and repair to an
authorised specialised reparation shop.
• Only use units, spare parts and supplies which are provided and recommended by
the manufacturer. Damaged or improper units may break in use, damage the appliance
or cause injury.
28
40962_foodprocessor_manual_mai07.qxp 18.07.2007 10:37 Seite 28