Design Food Processor User Manual

Operating
The Design Food Processor works extremely quick; most kinds of food are processed within
some seconds. The Food Processor is designed only for short time operation of max. 3
minute. If you need it for longer, switch it off after 3 minutes and allow the motor to cool
for 1 minute.
The appliance has a safety contact, which allows the motor to start running only if the
bowl and the lid are positioned correctly on the motorblock. If the motor stalls or sticks
during operation, immediately turn `OFF` the appliance and unplug the power connector.
Check whether there is any obstruction in the container, and remove it (see ‘Care and
Cleaning’). Do not overfill the container. Possibly, take some food out of the container,
using a wooden or plastic spoon, before starting the appliance again. Do not insert your
fingers in the container.
• Operating the slicing or the shredding disc: remove the fibre of the discs when the
openings are blocked. Always use the food pusher when operating and gently guide
food down the feed chute.
• Operating the universal chopping blade: Remove all inedible hard parts (such as
stem, hard peeling and seeds) of the food before putting them into the feed chute. The
food could wedge the blade. Pay attention that the bowl does not get overloaded and
if necessary remove the food of the bowl with a spoon before continuing to operate.
Before first use
WARNING: The blades and shredding and slicing discs are very sharp. Pay attention when
handling the units. Only touch the discs and blades on the edge and handle with care
when cleaning. Do not leave young children play with the appliance or any part of it or
the packing material.
After unpacking, remove all promotional and packing materials as well as any foreign objects.
Before first use and after a long period of storage, clean the appliance with a damp soft
cloth and warm soapy water (see ‘Care and Cleaning’).
Shredding and slicing
WARNING: Always turn the appliance ´OFF`, wait until the motor stops and unplug the
appliance before assembling/disassembling. Always completely assemble your appliance
before you plug the plug into the power point. Only touch the discs and blades on the
edge and handle with care when cleaning.
1. Place the container on a suitable, stable, dry, and clean working surface. (see:
‘Safeguards for Daily Operation’).
2. Place the bowl on the motorblock turning it anticlockwise until it is securely locked in position.
Do not use any force. The handle should be facing the front which is above the control panel.
31
40962_foodprocessor_manual_mai07.qxp 18.07.2007 10:37 Seite 31