User Manual

IMPORTANT: Do not tighten them with force or too tight to avoid damaging the

appliance or the sealing ring.

ATTENTION: Ensure the container is leak-proof before putting the container on the

motorblock. Always wipe off spilled liquids immediately. Never let any liquids run into

the motorblock or underneath it to avoid electric shock. When liquids are spilled on the

motor housing, immediately unplug the appliance and dry the motor housing to

avoid risk of electric shock or fire. Do not attempt to operate the appliance, when

liquids are on or in the motor housing.

ATTENTION: Never place the holder or the blade only on the motorblock. Never

touch the drive gear when the plug is connected to the power outlet. Never combine the

container and the holder without the blade. Without the blade the bottom of the

container is open. Spilled liquids could run right into the motorblock and might damage it.

ATTENTION: When liquids are spilled on the motor housing, immediately unplug

the appliance and dry the motor housing to avoid risk of electric shock or fire. Do

not attempt to operate the appliance, when liquids are on or in the motor housing.

ATTENTION: Never try to sharpen the blade. Replace the blade if the blade is blunt.

Please contact our service department for the replacement part.

4. Place the proper assembled glass container (with the holder facing

down) onto the motorblock (see picture E). Turn it until the container locks onto

the motorblock, pick a speed on the control panel and start processing.

ATTENTION: Always ensure the motorblock is turned off when placing

the container on it to avoid personal injury.

Operating

Before first use

WARNING: The blade is very sharp. Pay attention when handling the blade. Only touch

the blade on the sealing ring. Do not leave young children play with the appliance or

any part of it or the packing material.

After unpacking, remove all promotional and packing materials as well as any foreign objects.

Before first use and after a long period of storage, clean the appliance with a damp soft

cloth and warm soapy water (see ‘Care and Cleaning’).

General Tips

Place the container on a suitable, stable, dry, and clean working surface.

(see: ‘Safeguards for Daily Operation’). Always wipe off spilled liquids immediately.

Never let any liquids run into the motorblock or underneath it to avoid electric shock.

40993_mixmax_manual.qxp 20.12.2006 11:11 Seite 28