User Manual

Directions for use

• The mixer proceeds fast and reliable when you add the ingredients one after the

other in small portions.

• The mixer processes within seconds. Avoid processing food longer then necessary.

• Always ensure the lid is closed before starting the motor to avoid spilling.

• You can add ingredients during the operation through the refill aperture. Never

place your face or hands over the opening.

• If the motor slows down use the next faster speed.

• Always clean the appliance right after use.

If ingredients get stucked on the walls of the container turn the appliance off, take the

container off the motorblock, open the lid and push the food down carefully using a

spatula. Take care of the blade.

Production steps

WARNING: Ensure the container is locked securely onto the motorblock and that

you can not knock the appliance over during operation to avoid personal injury.

1. Fill the ingredients into the container.

IMPORTANT: Cooked food should cool down before processing. Food with hard texture

should be cut in pieces of 2 cm size before filling them into the container. Fill liquids

in first. Do not overload the container to avoid spilling or overloading the motor.

2. Place the lid on the container and press the lid down to seal the top of the

container. Close the opening of the lid with the refill lid. The refill lid has two small

guiding pins that fit in the matching gaps of the lid. Push the lid down and turn it

clockwise until it is securely locked.

WARNING: Never take the container off the motorblock, the lid of the container or

place a spoon or other foreign substance into the container while the motor is running.

Always turn the appliance ´Off` first and wait for the motor to stop moving. Now you

can take the container off the motorblock remove the lid and check on the ingredients.

WARNING: Do not fill ingredients into the container which exceed a temperature of 60

degrees. After processing ice cubes slowly heat up the container before processing hot

ingredients. Otherwise the container will crack or gets damaged. Use gloves processing

hot liquids. Ensure not to burn yourself on the container, overrunning, spurt out or hot

steam.

ATTENTION: If you are working with hot ingredients first take off the refill lid and

cover the opening with a towel to release the over pressure and steam.

40993_mixmax_manual.qxp 20.12.2006 11:11 Seite 31