User Manual

Problem Solution
The motor stucks or slows down Use a higher speed for processing. If necessary (because the container is overloaded) pour
out part of the content of the container. Chop hard ingredients such as nuts or chocolate before
putting them into the container.
The motor stops or you can not Turn the appliance 'OFF', if the motor stops all of a sudden or stalls during operation
turn the motor on again to avoid overheating. Go through following checking list:
Take the container off the motorblock and clear out firmly bounded food that blocks the
blade using a spoon. Do not use force to avoid damaging the blade.
Chop hard ingredients such as nuts or chocolate before putting them into the container.
If necessary (because the container is overloaded) pour out part of the content of
the container and try to restart the motor using a higher speed.
ATTENTION: Do not try to mix ingredients of very hard consistency or ingredients which
are too big in size to avoid overloading the motor. Do not overfill the container.
Process very hard food in more then one go. The mixer is not intended for chopping
nuts with shell, bones or simular hard ingredients.
The bottom of the container Turn the appliance 'OFF' and pull the plug out of the power outlet.
untightens during operation; Empty the container. Clean and dry the motorblock.
liquid leaks. If any ingress of moisture into the motorblock or through the louvre take the appliance
for technical maintenance and repair to an authorised specialised reparation shop.
Ensure the container is properly assembled.
TIP: Before filling liquid into the container check if the container is leak-proof by filling it
with water. If necessary screw the holder tighter onto the container but do not overwind the
screw-thread. If the container is still leaking check following steps.
It is not possible to get the Empty the container. Disassemble the container and check if there are crusts or damages
container leak-proof; on the single units. Clean the units if necessary.
Liquid leaks from the bottom
of the container. Replace damaged units by original spare parts of the manufacturer.
Assemble the container according to the instructions.
ATTENTION: Never use the appliance with improper or damaged units.
Only use spare units provided and made by the manufacturer. Contact you vendor for help.
The container is screwed on too Ensure to screw the holder anti-clockwise to get it loose.
tight to the holder.
Slide your hand through the handle of the container. The handle should be behind
the back of your hand. Grab the holder with your other hand and screw the holder
anti-clockwise.
Ask someone to hold on to the container while you screw the holder with both hands.
TIP: It is easier to loosen the container if you put a drop of vegetableoil onto the sealing ring.
35
40993_mixmax_manual.qxp 20.12.2006 11:11 Seite 35