Manual

Technical Specifications

Model: Art.-No. 41141 Vital Citrus Juicer

Power supply: 220/240 V AC, 50 Hz

Power consumption: 80 - 100 W

Revolutions per minute: 97 rpm +/- 20%

Length of power cord: appr. 107 cm

Weight: appr. 2,5 kg

Dimensions: appr. 170 x 285 mm (diameter x height)

Certification:

Operation

Before first use

Remove all promotional materials and packing as well as any foreign objects, but do not

remove the model label.

Before first use and after a long period of storage, clean the citrus juicer with a damp soft

cloth and warm soapy water (see „Care and Cleaning“).

Assembling the appliance

CAUTION: Before you plug in the juicer, always ensure that the appliance is assembled

correctly and, that there are no foreign objects in the filter basket or juice container.

1. Lift off the dust cover.

2. Unwrap the power cord from the cord storage under the bottom of the motor base. Place

the appliance on a sufficient surface (see „Safeguards for Daily Operation“).

3. Place the juice container on the motor base. The spout settles in the cut out of the motor base.

4. Insert the filter basket in the juice container. The upper edge of the filter basket may not

protrude the brim of the juice container.

5. Place the juice cone on the drive shaft.

Important: If food dried on the drive shaft or in the interior of the juice cone, you may

find it difficult to mount the juice cone. Do not use any violence, but clean the surfaces of the

drive shaft and juice cone first, before assembling the appliance (see „Care and Cleaning“).

CAUTION: Do not use any hard or sharp utensils or abrasive cleaners for cleaning. Handle

with care to avoid damage. With the juice cone installed, the appliance is ready for use.

1. 3. 3. 4. 5.