Design Espresso Advanced - Barista Edition Manual
64 65
WARNING: Do not immerse power cord, power plug or aplliancein water or any other
liquid. Tthe water tank should never be removed or completely emptied during decalcifying.
DECALCIFYING THE MACHINE
• Removethe portafilterandfrothingattachment.Pourthemixture ofwhitevinegarand
water into the water tank.
• Plugthemachineintothepoweroutlet.
• PressthePOWERbuttontotheon-position.
• Placealargecontainerunderthegroupheadandsteamwand.
• Whenthebrewingtemperaturehasbeenreachedallthebuttonsurroundsonthecontrol
panel will illuminate. Press and hold the one cup or two cup button to commence manual
pour. Release the button once half the mixture of white vinegar and water has run through
the group head.
• SetthesteamdialtotheSTEAM-positionandallowsteamtorunthroughthesteamwand
for approximately 2 minutes. Return the steam dial back to the off-position.
• Afterdecalcifying,removethewatertankandrinsethoroughlythenrefillwithfreshcold
water. To rinse the machine, repeat previous steps.
CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on burr heads which can impede perfor-
mance.
CLEANING THE STEAM WAND AND FROTHING ATTACHMENT
• Thesteamwandandfrothingattachmentshouldalwaysbecleanedafterfrothingmilk.
• Removethefrothingattachmentandrinseinwarmtapwater.
• Wipethesteamwandwithadampcloth,andthenwiththesteamwanddirectedback
into the drip tray, briefly set the steam dial to the STEAM-position. This will clear any remai-
ning milk from inside the steam wand.