Design Coffee Grinder Advanced Pro Owner manual

44
wise, moisture could get into the milling works and coffee powder could stick to the surfaces
and block the milling works.
1. Insert the grind catch tray into the base of the appliance. The grind catch tray is secured via
a magnet. It is correctly in place, when on a level with the
exterior of the power base.
2. Assemble the burr sleeve. For this, grasp the burr sleeve at
the shackle and insert it in the milling works with the red
arrow pointing to ALIGN. Then turn the burr sleeve clockwise
until the red arrow points to LOCK. Doing so, you will dis-
tinctly feel resistance.
Important: For proper operation, it is crucial to assemble and lock the burr sleeve correctly.
Ensure that the red arrow on the brim of the burr sleeve faces to the LOCK designation. The
burr sleeve must be tightly fixed in place.
3. Ensure that the bean hopper lock is in UNLOCK position. It is best to turn the bean hopper
lock back and forth once for checking its position.
4. Place the bean hopper with the bean hopper lock in UNLOCK position on the milling works.
Turn the bean hopper slowly until it settles down on the milling works. Turn the bean hopper
lock into the LOCK position. Now, the bean hopper must have a stable and tight stand on
the appliance and may not tilt or wobble.
5. Cover the bean hopper with the bean hopper lid.
Tip: It is best to keep the bean hopper lid closed, even when the appliance is not in use, to
avoid dust getting into the bean hopper.
STORAGE
WARNING: Always unplug the appliance when it is not in use. Do not leave the appliance
unattended while it is connected to the power supply to avoid risk of electric shock and fire.
Always clean the appliance and all its parts before storing to avoid that any remainder of
coffeewillageinthegrinderandgomouldyorturnrancid(see:›CareandCleaning‹).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissiblestrain(mechanicalorelectricshock,heat,moisture)andwhereitisout of reach
of young children. Place the appliance on a clean and stable surface, where it cannot fall.
Do not place any hard or heavy objects on the appliance or any part of it.
Always handle the power cord with care. Power cords may never be knotted, twisted, pulled,
strained, or squeezed.
Do not use any parts or accessories of the appliance for any other purpose than operating the
appliance. It is good advice to store the parts and accessories of the appliance with the appli-
ance.Forthis,completelyreassembletheapplianceaftercleaning(see:›CareandCleaning‹),
thus protecting all parts against damage and loss.
CAUTION: Do not hold the appliance by the bean hopper or power cord for moving the ap-
pliance. To move the appliance, always grasp the power base at both sides near the bottom
to avoid damage.
1. If you do not wish to use the appliance for a longer period of time, then unplug and clean
theappliance.Thereafter,reassembletheappliance(see:›CareandCleaning‹).