Design Coffee Grinder Advanced Pro Owner manual

32
Always grasp the plug to disconnect the power cord. Do not touch the appliance or power
plug with wet hands when the appliance is connected to the power supply.
• DO NOT drip or spill any liquids on the power base or power cord. Do not place the burr
sleeve or bean hopper on the power base, when these parts are wet. Otherwise liquid could
run into the power base, causing risk of electric shock or fire. Additionally, moistened coffee
powder could block the milling works.
Moving Parts
The bean hopper must be assembled and locked properly to operate the appliance. Do not
attempt to deactivate this safety interlock. If the appliance does not work, even when handled
correctly(see›Operation‹),thenunplugtheappliance.Sendthecompleteappliancetoan
authorized service centre for repair.
Donotinsertyourhands,hair,clothesoranyotherobjects(e.g.cookingutensils)inthebean
hopper, with the appliance connected to the power supply. During grinding, single coffee
beans could leap out of the bean hopper. This could happen especially with the bean hopper
almost empty. Thus, ensure to keep the bean hopper lid firmly closed during operation. Additi-
onally, keeping the bean hopper lid closed will prevent unnecessary loss of flavour and taste.
TECHNICAL SPECIFICATIONS
Model: Art. No. 42639 Design Coffee Grinder Advanced Pro
Powersupply: 220-240VAC,50Hz
Powerconsumption: 165 W
Lengthofpowercord: approx. 90 cm
Weight: approx. 2.78 kg
Dimensions: approx. 15.5 cm x 22.0 cm x 39.0 cm
(widthxdepthxheight)
Capacity: Coffeebeans:450g(approx.14cups)
Groundcoffeepercylce:12cupsofcoffeeor
2 shots espresso
Certification:
PROPERTIES OF YOUR NEW COFFEE GRINDER
Important: Your new Design Coffee Grinder Advanced Pro is intended for grinding roasted
coffee beans, and is driven electrically. The appliance is NOT suited for grinding or chopping
other food or materials. Additionally, the appliance is NOT suited for processing already
ground coffee.