Conventional Flue Instructions

Medium Vision Layout

The logs for the fuel bed are clearly individually labelled,

A to D.

7.17 Ensure the burner tray is clean and free from any debris,

see Diagram 22.

7.18 There are 3 embers. Place 2 embers in the back corners of

the burner, resting in the cut outs, see Diagram 23.

Place the last ember loosely at the front of the fuel bed to

cover the hole in the centre.

7.19 Place Log D on the left hand side of the burner. There is a

hole on the underside of Log D which fits over the raised

stud on the left of the burner. The back of the log should

rest flat against the back panel, see Diagram 24.

User Instructions

7.20 Place Log B on top of Log D. There is a hole on the

underside of Log B which fits over the raised stud on Log D

to secure in place. The right hand side of the log rests in the

groove in the burner, see Diagram 25.

7.21 Place Log C on the right hand side of the burner. There is a

hole on the underside of Log C which fits over the raised

stud on the right of the burner. The back of the log should

rest flush against the back panel, see Diagram 26.

7.22 Place the log guard into position on the grooves on the

sides of the firebox, see Diagram 27.