Conventional Flue Instructions

23
Installation Instructions
8.23 Place Log A across Log C. There is a hole on the underside
of Log A which fits over the raised stud on Log C to secure
in place. The small cut out on the left side of the log rests
onto the log guard, see Diagram 31.
31
8.24 Sparingly spread an amount of the Embaglow bres
provided, covering the ports in the burner tray, Diagram 32.
Take care not to use more than half a packet per
application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
IT IS ESSENTIAL TO KEEP THE REAR PORT FREE
FROM OBSTRUCTION.
32
Keep Rear
Port free from
Embaglow
9. Completion of Assembly
9.1 To fit the window frame:
Small and Midi only:
Offer the frame to the foot of the opening and secure using
6 screws as shown, see Diagram 33, Arrow A.
Medium only:
Offer the frame to the foot of the opening and secure using
8 screws as shown, see Diagram 33, Arrow A & B.
33
A
A
A
A
A
A
B
B
9.2 Replace ALL of the glass frame securing screws ensuring
that a screw is present in all fixing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
9.3 Fit the glass front by inserting the hooks on the back of the
frame into the slots on the front of the appliance, see
Diagram 34.
34
9.4 Fit the glass plinth: