Conventional Flue Instructions

Servicing Instructions - Replacing Parts

4. Baffle & Ceramic Liners

4.1 To access the burner tray and interior workings of the

appliance it may be necessary to remove the baffle and the

liners.

4a. Liners

(Small Vision Only)

BAFFLE

4.2 There is no requirement to remove the baffle for servicing.

LINERS

4.3 The burner can be accessed without the need to remove the

side liner panels. If they need to be taken out then first

remove the screws securing the two brackets on either side

of the firebox.

The panels will now slide forward, see Diagram 4.

4.4 Gently lift the upper rear liner and pull forwards.

With the panel raised it should be possible to remove from

the liner brackets, see Diagram 5.

Note: It may be necessary to use a flat object like a

screwdriver to separate the two panels.

4.5 Slide the lower rear liner up and out of the lower bracket,

see Diagram 6.

4.6 Replace all parts in reverse order ensuring the cutouts in the

rear of the lower panel fit over the screws on the back of the

firebox, see Diagram 7.

4b. Baffle & Liners

(Midi Vision Only)

BAFFLE

4.7 The baffle must be removed before the liners can be taken

out of the appliance.

To do this undo the two screws securing it to the roof of the

firebox, see Diagram 8.

Screws

4.8 The baffle can now be removed through the front of the

appliance.