Conventional Flue Instructions

Servicing Instructions - Replacing Parts

4c. Baffle & Liners

(Medium Vision Only)

4.14 To access the burner tray and interior workings of the

appliance it may be necessary to remove the baffles and the

liners.

4.15 This appliance has 2 baffles, 1 metal and 1 vermiculite, that

must be removed before the liners can be taken out of the

appliance.

4.16 Remove the logs.

METAL BAFFLE

To remove the metal baffle:

4.17 Undo the 3 screws securing it to the roof of the firebox,

see Diagram 13.

Screws

4.18 The baffle can now be removed through the front of the

appliance.

VERMICULITE BAFFLE

To remove the vermiculite baffle:

4.19 Lift the vermiculite baffle and slide out through the front of

the appliance, see Diagram 14.

Once the baffles have been placed carefully to one side the

liners can then been taken out in the following order.

REFLECTIVE LINERS

4.20 To remove the left hand liner undo the 3 screws, including

the 1 under the log guard bracket, see Diagram 15.

4.21 Remove the log guard bracket.

4.22 Tilt the liner inwards towards the centre of the firebox before

lifting up and pulling out through the front of the firebox, see

Diagram 16.

4.23 To remove the right hand liner undo the 3 screws, including

the 1 under the log guard bracket, see Diagram 15.

4.24 Remove the log guard bracket.

4.25 Tilt the liner inwards towards the centre of the firebox before

lifting up and pulling out through the front of the firebox, see

Diagram 16.