Conventional Flue Instructions

VERMICULITE LINER

4.26 The rear liner does not need to be removed in order to

access the burner tray for maintenance, however it is

advisable to remove the rear panel to avoid possible

damage and to clean or replace.

4.27 To remove the back panel lift out of the bracket and remove

through the front of the appliance, see Diagram 17.

4.28 With the liners and baffle removed the firebox is clear for

cleaning and maintenance, see Diagram 18.

Servicing Instructions - Replacing Parts

5. Main Burner

5.1 To replace the main burner:

Remove the baffle and enamel liners, see Section 4.

5.2 Remove the three securing screws from the edges of the

burner, see Diagram 19.

Screws

5.3 Slide the burner fully to the right whilst lifting the Left Hand

side clear of the bracket, see Diagram 20.

Slide to the right and

lift the Left hand side

5.4 Slide the burner back to the left and out of its location.

IMPORTANT: Take care when removing the burner not

to damage the ceramic pad with the pilot unit attached.

Refit in reverse order

Midi Version Shown