Installation Instructions
Problem Possible Causes What To Do
The air is not always (6363/A=B:=7@;<A • This is normal. The heat pump will produce warm air
cool or hot during =?<2B17;56<A/7? but not as hot as air produced when the higher-cost
operation electric heat is used.
(63':/?A/;BE797/?F • This causes the fan to blow room temperature air
<;A?<9@:/F03@3AA< even when the compressor or heater cycles off.
1<;A7;B<B@4/; The continuous air movement provides better
overall temperature control in the cool mode.
See 1%68%2@ 330-2+)%8-2+ on page 5.
The air does not feel (6363/A=B:=/9<;3 • Use the Electric Heat Option. This turns off the
warm enough during =?<2B13@/7?A6/A4339@ heat pump and warms with electric heat only.
heating operation 1<<93?A6/;23@7?32 NOTE: !7)3*8,-7348-32;-006)7908-2-2'6)%7)()2)6+=
'3279148-32
The unit is not (63':/?A/;BE797/?F • See 1%68%2@ 330-2+)%8-2+ on page 5.
blowing out air <;A?<9@:/F03@3AA<1F193
The electric heating (63=<D3?1<?27@;<A • Remove the room cabinet and make sure that the
feature does not work 47?:9F/AA/1632 yellow connector on the end of the power cord is
firmly engaged.
Temperature display (631<:=?3@@<?:/F • Set the operation control to STOP and then restart
flashes 6/C34/7932 the unit. If the flashing light reappears within
30 minutes, call for service.
GEAppliances.com
21
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support