Microwave Oven ZEM200WV

Assemble

trim kit

frame

Install

trim kit

frame

• Assemble top, bottom

and side trims with four

screws D, as illustrated.

When assembled, top,

bottom and side strips

must be flush.

Note:

Bottom trim has a hinge

notch and is not interchangable

with top trim.

Caution:

Do not overtighten

screws; doing so could cause

misalignment of top and side

strips.

• Use the assembled frame as a template. Insert the

frame into the cut-out and locate the attaching

holes.

• Temporarily hold the frame in place by starting the

four screws that attach the frame to the base pan

and side covers.

• Push frame as far left as possible, drive the four

screws.

• Check to be sure door clears the trim when open.

Installation

Microwave Oven

• Mark the four holes on the side of the trim.

• Remove the frame.

• Center punch and drill 3/32" pilot holes.

• Position the assembled frame around the oven and

secure with 8 screws C, using the smaller Phillips

head screwdriver to prevent burring the Phillips

head.

Screw D

Screw C