PV970 PV976

 49-2000916 Rev. 0
Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Ŷ
IMPORTANT – Save these instructions
for local inspector’s use.
Ŷ
IMPORTANT – Observe all governing
codes and ordinances.
Ŷ
Note to Installer – Be sure to leave these
instructions with the Consumer.
Ŷ
Note to Consumer – Keep these instructions for
future reference.
Ŷ
Skill level – Installation of this vent hood requires
basic mechanical and electrical skills.
Ŷ
Completion time – Approximately 1 to 3 hours
Ŷ
Proper installation is the responsibility of the
installer.
Ŷ
Product failure due to improper installation is not
covered under the Limited Warranty.
PRODUCT DIMENSIONS
Chimney Vent Hood
INSTALLATION INSTRUCTIONS
CAUTION
Due to the weight and size of
these vent hoods and to reduce the risk of personal
injury or damage to the product, TWO PEOPLE
ARE REQUIRED FOR PROPER INSTALLATION.
FOR YOUR SAFETY:
WARNING
Before beginning the installation,
switch power off at service panel and lock the
service disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to
the service panel.
30” Models Require a 30” Wide Opening
”
*Height to
ceiling
”
29´
10-7´
13-1´
2-”
*Height to Ceiling
Vented Recirculating
Min ´ ´
Max ´ ´
´
´
´
´
36” Models Require a 36” Wide Opening
* For supplied duct cover ceiling heights for vented installation and
recirculating installation, refer to the table on page 13.
´
Allow 1” overlap
of duct.
´
*Height to Ceiling
Vented Recirculating
Min ´ ´
Max ´ ´
´
*Height to
Ceiling