Instructions / Assembly

36 LED Light Set
IMPORTANT SAFETY INSTRUCTIONS
36 LED G35 iTwinkle light show Item Number : 00851
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
This is an electrical product - not a toy! To avoid the risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) ou
tlet. If one is not provided contact a qualified
electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters, fireplaces,
candles or other similar sources of heat.
Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
• Do not use this product for other than its intended use.
Do not hang ornaments or other objects from cord, wire, or light string.
Do not close doors or windows on the product or extension cord as
this may damage the wire insulation.
Do not cover the product with cloth, paper or any material not part of
the product when in use.
This product has a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock. This plug will fit in a
polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not use with an extension cord unless plug can be fully inserted.
Do not alter or replace the plug.
Read and follow all instructions that are on the product or provided
with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
• When the product is placed on a live tree, the tree should be well
maintained and fresh. Do not place on live trees in which the needles are
brown
or break off easily. Keep the tree holder filled with water.
If the product is placed on a tree, the tree should be well secured and stable.
Before using, or reusing, inspect product carefully. Discard any products
that have cut, damaged or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is
placed, including trees, branches, or bushes, to avoid any undue strain or
st
ress on the product conductors, connections and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.
Install Class 2 Power Supply To String:
Fig. 1 Fig. 2
Fig. 3
NOTE: Use only this GE branded, Class 2 Power Supply, Model SA3A-050-
3000, manufactured by TDC that was provided with this product.
DO NOT use this adapter with any other product.
1. Remove the Power Supply from its packing box.
2. The LED string is fitted with a 2-pronged fitting.
3. Align the notch in fitting with the inner tab on end of Power Supply {Fig. 1}
4. Fully insert the fitting into the Power Supply {Fig. 2}
5. Screw the collar completely onto the Power Supply turning clockwise {Fig. 3}
NOTE: LEDs are non-replaceable. Tampering with this set voids the warranty.
CAUTION:
To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal, and
b) Do not mount or support strings in a manner that can cut or
damage wire insulation.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including
interference that may cause undesired operation.
Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, use
s and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
in
stalled and operated with minimum distance 20cm between the
radiator & your body.
Note: The country code selection is for non-US models only and is
not available for US models. Models marketed in the United States
operate only on US Channels.
This is not a toy, for decorative use only
For Indoor and Outdoor Use
120V 60Hz
Nicolas Holiday Inc.
www.geholidaylighting.com
9F, No. 37, Guangfu North Rd. Taipei, Taiwan 10560
All rights reserved.
Printed in China
06/04/2015
UL Model No.: NHI-G35-36(0.25)
When using electrical products, basic precautions should always be
followed including the following:
If you need assistance please call our toll free number:
1-877-398-7337 and a customer support representative will assist you.
Holiday season Nov 14 to Dec 23: Mon – Fri, 8am to 8pm EST,
Sat – Sun 10am to 7pm EST. Off season: Mon – Fri 10am to 7pm EST.
You can also visit us on the web at:

Summary of content (2 pages)