Manual

About storage drawer and cover removal.

Not all features are on all models.

Operating Instructions

Installation Instructions

Safety InformationTroubleshooting TipsCustomer Service

Full-Width Drawer with Plastic Cover

To remove the cover, lift it off its supports, pull it

forward, tilt it and take it out.

Drawers can be removed easily by grasping the sides and lifting up

slightly while pulling drawers past the

stop

location.

Drawer and Cover Removal

Twin Drawers With Glass Cover

To remove:

Remove the drawers.

Reach in, push the front of glass cover up and, at the

same time, pull it forward as far as it will come.

Tilt it and take it out. Avoid cleaning the cold glass cover

with hot water because the extreme temperature

difference may cause it to break.

Remove the drawer frame. (Always remove the glass

cover before you take out the drawer frame.)

Lift the frame off the supports at each side and back,

pull it forward, tilt it and take it out.

To replace:

Lower the frame until it rests on the supports at

each side and back.

Replace the glass cover, pushing its rear edge firmly

into the rear frame channel and gently lowering the

front into place.

Replace the drawers.