Pro Bar HD 100 Antenna User’s Manual 33683 Version 01
Introduction: The 33683 Pro Bar HD 100 antenna is specially designed to receive digital and analog terrestrial broadcasted TV signals. The compact and stylish design will blend in with any décor. Important safety instructions: • This antenna is for indoor use only. • Do not install in wet locations or locations that can get wet.
Antenna assembly: 1. Remove contents from the box. 2. Unwind coax cable and feed coax cable through center base. 3. After feeding coax cable through, insert antenna onto the base ensuring that you line up the holes on the bottom of the antenna to the pegs of the stand. i. Push the coax cable into the channel on the bottom of the stand until the cable is flush with the bottom of the stand. Wall mounting For best reception, you will likely want to mount the antenna above your television.
Installation: Easy Installation for Analog TVs with Set-Top Box 1. Connect the coax cable from the antenna directly to the set-top box antenna input. 2. Connect another coax cable (not included) from the set-top box output directly to the antenna input on your TV. 3. Run a channel scan on your set-top box, following your set-top box instruction manual. Easy Installation for Today’s HDTVs 1. Connect the coax cable from the antenna directly to the antenna input on your HDTV. 2.