Installation Guide

12 31-2000355 Rev. 0

• Align bottom trim tabs to slots in the bottom of the

oven.

SLIDE OVEN INTO CUTOUT

Two people are required to

lift the oven into the opening.

Grasp the bottom at the front and rear. DO

NOT USE THE HANDLE TO LIFT THE OVEN.

DAMAGE WILL OCCUR!

• Lift and hold the oven at the front of the

opening.

Hold the oven at a 45º angle and plug in the power

cord.

• Carefully, slide the oven into the cabinet part way.

Leave the oven a few inches forward of the

cabinet frame.

• Check to be sure the power cord is not trapped

under the oven or along the sides of the oven.

INSTALL BOTTOM TRIM

Installation Instructions

INSTALL MOUNTING SCREWS

• Slide the oven the remaining way into the

opening so that the side flanges and control

panel are against the cabinet frame. Make sure

that the oven is centered in the opening.

• Open the door, place a turntable tray in the

oven and make sure that the tray in the unit is

level.

• Drill pilot holes through the side flanges.

• Drive the color-matched screws into the side

flanges. It is recommended that the screws

be hand tightened..

• Turn power on at the source. The interior light

should come on when the door is opened.

• Refer to the Owner’s Manual for operating

instructions.

FINALIZE INSTALLATION

• Secure the bottom trim to the bottom of the oven

using 3 brass screws provided.

CAUTION