Instructions / Assembly

THREE-CONDUCTOR BRANCH CIRCUIT CONNECTION

NOTE: If residence leads are aluminum conductors, see WARNING

in Section 3, Electrical Requirements.

When connecting to a three-conductor branch circuit, if local codes

permit:

A. Connect the bare oven ground conductor with the crimped

neutral (white) lead to the branch circuit neutral (white or gray in

color), using a wire nut.

B. Connect the oven red lead to the branch circuit red lead

and the oven black lead to the branch circuit black lead

in accordance with local codes, using wire nuts.

C. Install junction box cover.

Ground

and Neutral

Wires

Junction Box

Cover

FOUR-CONDUCTOR BRANCH CIRCUIT CONNECTION

NOTE: If residence leads are aluminum conductors, see WARNING in Section 3, Electrical Requirements.

A. Cut the neutral (white) lead from the crimp. Re-strip the neutral (white) lead to expose

the proper length of conductor.

B. Attach the appliance grounding lead (green or bare copper)

in accordance with local codes. If the residence grounding

conductor is aluminum, see WARNING in Section 3.

C. Connect the oven neutral (white) lead to the branch circuit neutral

(white or gray) in accordance with local codes, using

a wire nut.

D. Connect the oven red lead to the branch circuit red lead

and the oven black lead to the branch circuit black lead

in accordance with local codes, using wire nuts.

NOTE: If the residence red, black or white leads are aluminum

conductors, see WARNING in Section 3.

E. Install junction box cover.

SLIDE OVEN INTO OPENING

• Lift oven into cabinet cutout using the

oven opening as a grip. Carefully push

against oven front frame. Do not push

against outside edges.

Ground

Wire

Junction Box

Cover