Specification

Dimensions and Installation Information (in inches)
For answers to your Monogram
®
or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
Note: This model is not approved for installation below a
countertop or in combination with a separate cooktop. The
minimum installation height from the floor is 16-1/4".
Note: A minimum gap of 14" from either side of the wall oven
to an adjacent 45 or 90 cabinet, drawer or was is required to
avoid interference with the opening of the doors. The handles
protrude 2-1/2" from the door face.
Note: Countertops may need to be notched on either side of the
wall oven to avoid interference with the opening of the doors.
Installation information: Before installing, consult installation
instructions packed with products for current dimensional data
and for alternate installation options.
This model is not approved
for flush-mount installation
Specification Created 10/14
CT9070SH
GE Cafe
™
Series 30 in. Built-In French-Door Single Convection Wall Oven
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
If both ovens are Fr ench Door models, then 30” min.
If the second oven is a drop down door model, then 14” min.
9 1/2”
5
1/4”
Junction box
location (may also
be located in
adjacent cabinet.)
X
Y
Countertop
If Y = 0.0” then X = 0.0”
O
therwise,
X
= Y + 1.0” (2.5 cm) Min.
Cabinet Door
INSTALLATION TO ADJACENT COUNTERTOP
AND CABINET DOORS
14” Min.
O
ven Door Side
C
learance
(
Both Sides )
16” Min.
O
ven Door
F
ront
C
learance
ELEC. ELEC.
TOP VIEW