- General Electric Managed Ethernet Switches Installation & Operation Instructions

User
’s Manual
79
Manageable 8/9-Port Switch
Step 3:
The Static Source MAC Filter window appears. Click in the Source MAC Address Filter text box
and type a unique MAC source address you want to add. Then click the
Add button.
Step 4:
A confirmation window appears. Close the confirmation window.
Step 5:
If you no longer need a source MAC address, click Delete MAC Addr
button to delete it in Step 2.
Step 6:
The Delete Source MAC Address window appears. Click the Select a MAC Address drop-down list
and select the source MAC address you want to delete. Then click the
Delete button.
Step 7:
A confirmation window appears. Close the confirmation window.
Step 1: Destination MAC Address
Click the Advanced Setup button, and point to Static MAC Filter in the selection menu.
Click
Destination MAC Address.
Step 2:
Click Add MAC Addr button to add a destination MAC address for static filtering.
Refer to
Step 2~4 in Source MAC Address section for similar procedure.
Step 3:
Click Delete MAC Addr button to delete a destination MAC address for static filtering.
Refer to Step 5~7 in Source MAC Address section for similar procedure.
IP Multicast Group
To view the IP multicast group addresses, click the Advanced Setup button, and click IP Multicast
Group in the selection menu. The information is read-only.
VLAN Perspective
To view the VLAN configuration information, click the Advanced Setup button, and point to VLAN
Perspective in the selection menu.