user manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Logicmaster 90-70 Configuration
- Chapter 4 Programming Guide
- Overview
- Selecting a Program Block
- Adding the Program Block Logic to an Application Program
- Calling the Program Block
- Program (%P) References for the I/O Link Program Blocks
- Global (%G) References for the I/O Link Program Blocks
- Configuring I/O Links
- Controlling the I/O Link Module
- Monitoring Link Operation
- Index
3
22 Series 90 -70 I/O Link Interface Module User’s Manual – February 1993
GFK-0644A
4. If you are using version 4 of Logicmaster, press F1 (vme) to display the catalog list
shown below. Select Foreign VME from the list.
If you are using version 3 of Logicmaster instead press F2 (vme) to display the
catalog list. From the list, select Foreign VME (no interrupt).
5. No further configuration is required; press Rack (Shift–F1) or the Escape key to
return to the rack display.