Specification

Dimensions anD installation information (in inches)
Listed by
Underwriters
Laboratories
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
GDt635hGJ/hmJ/hsJ
GE
®
Hybrid Stainless Steel Interior Dishwasher with Hidden Controls
Specification Created 5/15
For answers to your Monogram,
®
GE Profile
™
or GE
®
appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
24"
Typical
33-3/8" MIN.
adj to
34-5/8" MAX.
23-3/4"
29-7/8"
27-1/2"
4" (toekick)
Includes 3/4" custom panel
• The rough cabinet opening must be at least 24" deep,
24" wide and approximately 34-1/2" high from floor to
underside of the countertop.
4"
6"
5"
5"
4"
Figure A
Floor MUST be Even
With Room Floor
Cabinets
Square
and
Plumb
This Wall Area
must be Free
of Pipes or
wires
24"
Min.
24"
Min.
33-1/2" to 34-3/4"
Underside of
Countertop
to Floor
Plumbing and Electric Service
Must Enter Inside This Area
ElEctrical rating
Voltage AC ...............................................120
Hertz ........................................................60
Total connected load amperage ................7.1
Calrod
®
heater watts ................................415/800
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
installation information:
Before installing, consult installation
instructions packed with product for
current dimensional data.