GE Security Installation/Operation Instructions Warranty Information TT3010 TT3010-R3 TT3020WDM TT3020WDM-R3 TT3030 TT3030-R3 TT3030WDM TT3030WDM-R3 TR3010 TR3010-R3 TR3020WDM TR3020WDM-R3 TR3030 TR3030-R3 TR3030WDM TR3030WDM-R3 Add “-T” for Talkaphone Compatible Module www.ifs.
TT3010 DIGITAL POTS LINE END OPTICAL OUT LINK STATUS OFF-HOOK ifs OPTICAL IN International Fiber Ring Pin 4 Systems Incorporated 203.426.1180 www.ifs.com PHONE CONNECTION Tip Pin 3 RING DETECT POWER POWER -2 +12 VDC - 1 Black wire Black with white stripe 6 1 Simplex multimode fiber optic cable TR3010 DIGITAL POTS TELEPHONE END OPTICAL OUT LINK STATUS OFF-HOOK RING DETECT ifs 203.426.1180 www.ifs.
TT/TR3000 A A B C D Link Status Off-Hook Ring Detect Power B C D LED illuminates NOTE: All units set to USA/Canada standard. WORLD STANDARD JUMPER SETTINGS JUMPER SETTING J6 J7 STANDARD ON ON USA/CANADA OFF ON UK* ON OFF AUSTRALIA OFF OFF JAPAN TT J7 J6 TR J6 J7 * UK includes the following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Portugal, Spain, Sweden, Switzerland.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. could void the user’s authority to operate the equipment.
FCC Part 68 Registration Customer Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: FIBOT01BTT3000.. If requested, this number must be provided to the telephone company.
PROPER MOUNTING METHOD FOR THE TT/TR3000 1) Locate unit on solid flat horizontal or vertical surface. 2) Position unit no closer than 24 inches from any power source or machinery. 3) Securely mount unit using (4) four mounting screws (not provided). 4) Select the correct voltage requirements for your application, +12VDC or 12VAC. +12VDC attach black w/white stripe wire to pin 1 and black stripe to pin 2 (GND). For 12VAC connect brown to pin 1, green to pin 2 and blue to pin 3 from adapter.
Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws. 2. Lift off box top cover. 3. Locate and remove securement screws for printed circuit board. 4.