Spec Sheet

SPECIAL INSTALLATION REQUIREMENTS
GFQ14ESSNWW
GE® 24" 2.4 Cu. Ft. Capacity Front Load Washer/Condenser Dryer Combo
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Created 12/19
ADA COMPLIANCE:
- 4" ADA riser and drip pan for 24" frontload model: GAF140SSNWW
MINIMUM INSTALLATION CLEARANCES:
- When installed in alcove: Sides/Rear = 0" and Top = 1"
- When installed in closet: Sides/Rear = 0" and Top/Front = 1"
- Consideration must be given to provide adequate clearance for installation and service.
- Closet doors must be louvered or otherwise ventilated and have at least 60 square inches (387.1 cm2)
of open area. If the closet contains a second laundry unit, doors must contain a minimum of 120 square inches
(774.2 cm2) of open area.
BATHROOM OR BEDROOM INSTALLATION:
- The dryer MUST be exhausted to the outdoors with the exception of the condensing dryer.
- The installation must conform with the local codes, or in the absence of local codes, with the National Electric
Code and National Fuel Gas Code, ANSI Z223 for gas dryers.
MINIMUM CLEARANCE OTHER THAN ALCOVE OR CLOSET INSTALLATIONS:
- Minimum clearances to combustible surfaces 0" both sides, 3" rear.
FOR MORE INFORMATION ON VENTING KITS AND ACCESSORIES,
PLEASE CALL 1-800-GE-CARES.