Use and Care Guide

10
Outside top exhaust
(Vertical duct—3
1
⁄4″ x 10″ Rectangular)
Outside rear exhaust
(Horizontal duct—3
1
⁄4″ x 10″
Rectangular)
Outside top exhaust
(Vertical duct—7″ Round)
A
C
B
Recirculating
(Non-vented ductless—Optional for
JV5 Series models only)
D
Installation Instructions
CHOOSE VENT OPTION
Determine the vent option that your installation will
require from the following choices:
The outside vent exhaust option that your installation
requires will determine the hood knockouts that you
will use.
NOTE: Only JV5 Series models may be recirculated.
The JV6 Series models cannot be recirculated.
IMPORTANT: If the hood is to be installed in a
recirculating, non-vented ductless manner, do not knock
out any vent openings in the hood. Only an electrical
access hole will be knocked out of the hood.
1