MSDS

MATERIAL SAFETY DATA
SHEET
Version: 1.23
04/03/2012
M90044 12C
ELASTOMERIC SEALANT
Page 4/8
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TA
KEN IN HANDLING AND
STORAGE
Avoid contact with skin and eyes. Wash contaminated clothing before reuse. Keep out of reach of
children. Keep container tightly closed. Keep container dry. Avoid accidental ingestion of this material.
Wash hands and face before eating, drinking, smoking, using toilet facilities, or applying cosmetics.
Store between 40 F and 120 F.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
Eye wash facilities and emergency shower must be available when handling this product.
RESPIRATORY PROTECTI
ON
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
PROTECTIVE GLOVES
Neoprene
EYE AND FACE PROTECTION
Safety glasses with side shields; Monogoggles
OTHER PROTECTIVE EQU
IPMENT
Wear suitable protective clothing and eye/face protection.
Exposure Guidelines
Component
CAS
-
No.
Source
Value
White Mineral oil 8042-47-5 ACGIH, TWA Inhalable fraction. 5 mg/m3
Absence of values indicates none found
PEL - OSHA Permissible Exposure Limit; TLV - ACGIH Threshold Limit Value; TWA - Time Weighted Average; INTL REL - Internal
Recommended Exposure Limit
OSHA revoked the Final Rule Limits of January 19, 1989 in response to the 11th Circuit Court of Appeals decision (AFL-CIO v. OSHA)
effective June 30, 1993. See 29 CFR 1910.1000 (58 FR 35338).