User manual
BECCO2200 DCA
Configuration Guide
GE Energy Services
Restricted A164-0CG-1.00-2
Full
15
5.2.4 Type 1 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 1 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, scanned through the activation of the Type
1 Read Pseudo Control.
5.2.5 Type 2 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 2 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 2 Read Pseudo Control.
5.2.6 Type 3 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 3 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 3 Read Pseudo Control.
☞
☞☞
☞NOTE: Use Type 7 Read for Consecutive Status instead of Type 3 Read.
5.2.7 Type 4 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 4 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 4 Read Pseudo Control.
5.2.8 Type 5 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 5 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 5 Read Pseudo Control.
5.2.9 Type 6 Read Interval
This parameter specifies, in seconds, the minimum interval between Type 6 Read requests issued
to the device. A negative number configured indicates that no timed scans of this type are
required for this device. The device may, at any time, be scanned through the activation of the
Type 6 Read Pseudo Control.