users manual
8
3. Color Sengs
1) Color Eect: In Color Eect, there are 4 modes:
"Standard", "Photo", "Game", and "Movie" oered to
be selected.
2) Blue Light Reducon: Select "On" to reduces the
screen's blue light automacally.
3) Color Temperature: Select "Cool" to increase the blue
color of the image; Select "Warm" to increase the red
color of the image. Select "User" to adjust the RGB
color sengs manually.
4. Aspect Rao
1) Aspect rao: When select "16:9 Full Screen", the
monitor displays a 16:9 image in full screen. When
select 4:3, the monitor displays a 4:3 image with le-
right side black borders to ll the 16:9 screen. When
select "Original", the monitor displays the image in its
original size.
2) Overscan: only available when inpung HDMI video
signal (ex:1080P/720P). Enabling this funcon allows
you to calibrate the display area.
5. OSD Menu
1) Language Select: Change to the other language.
2) H. Posion: Move the OSD menu le/right.
3) V. Posion: Move the OSD menu up/down
4) OSD Timer (sec): Adjust the idle me before OSD
menu disappears.
5) OSD Transparency: Make the OSD menu transparent
to show the background.
6) Auto Power Off: Select "On" to launch this function, when no
image displayed on the screen, the monitor will enter Standby
mode, and power off itself after 15 minutes. Select "Off" to
disable this function. The monitor will stay in standby mode and
will not power off.
7) Power On/O Indicator: Select "O" to turn o the Power On/O Indicator.
8) Power Buon Lock: Select "On" to lock the Power Buon.
6. Audio: Adjust the audio volume or select silent mode.
7. Input Source:
1) Input Source: Select HDMI (input from HDMI port) or
USB type-C (input from USB Type-C).
2) Auto Search: When "On" is selected, the monitor will
detect two video input sources in sequence, and the
monitor will display the rst one read. When "O" is
selected, only the video source selected in Input
Source will be displayed. If no such selected video
signal inputs, the monitor will show "no signal" warn-
ing message, and won’t check other video sources.
3) CEC Mode: When "On" is selected, users can turn on
or o the monitor by connecng to the device with HDMI CEC funcon such as DVD
player, camera, or PlayStaon game console.
8. Informaon: Show Frequency of the input image, On-Lap model name, rmware
version ...etc.
1) Reset: Select "Yes" to reset to defaults.
Chapter 4 Sengs of Extended Display
Secon 1 Sengs of Extended Display on Windows 10
Click , then select 【Sengs】→ select【System】→ Select 【Display】→ Choose
"Extend these displays" at Mulple displays.