Use and Care Manual

Problem

TROUBLESHOOTING

Cause Solution

Light on, but motor does not

work

The leaf blocked Get rid of the blocking

The capacitor damaged Replace capacitor

The motor jammed bearing damaged Replace motor

The internal with of motor off or a bad

smell from the motor

Replace motor

Light does not work, motor

does not work

Beside the above mentioned, check the following:

Light damaged Replace lights

Power cord looses

Connect the wires as per the

electric diagram

Oil leakage

One way valve and the air ventilation

entrance are not tightly sealed

Take down the one way valve

and seal with glue

Leakage from the connection of

U-shaped section and cover

Tak e U-shaped section down

and seal with soap or paint

Shake of the body

The leaf damaged and causes shaking Replace the leaf

The motor is not tightly hanged Lock the motor tightly

The body is not tightly hanged Fixed the body tightly

Insufficient suction

The distance between the body and the

gas top too long

Readjust the distance

Too much ventilation from open doors

or windows

Choose a new place and

resemble the machine

The machine inclines

The fixing screw not tight enough

Tighten the hanging screw and

make it horizontal

The hanging screw not tight enough

Tighten the hanging screw and

make it horizontal