User manual

How to Connect the 4x4 Matrix for HDMI 1.3

1. Connect up to 4 HDMI source devices to the 4x4 Matrix for HDMI 1.3 using

the included HDMI cables.

NOTE: The display connected to the port labeled OUT 1 will have its EDID

used when the external EDID mode is active. If there are displays with different

resolutions in the setup it is recommended that the display with the lowest

resolution be placed on the HDMI port labeled OUT 1. This way, all of the

displays should be able to display an image when the external EDID mode is

active.

2. Connect up to 4 HDMI capable devices (i.e. displays) to the 4x4 Matrix for

HDMI 1.3 using user supplied HDMI cables.

3. Connect the included 5V DC power supply between the power input on the

unit and an open wall power socket.

4. Power on all output devices (i.e. displays) ﬁ rst and the source devices

second.

Wiring Diagram for the 4x4 Matrix for HDMI 1.3

CONNECTING AND OPERATING THE 4X4 MATRIX FOR HDMI 1.3

EXT-HDMI1.3-444

HDMI Source

HDMI Matrix

HDMI Display

HDMI CABLE