Digital Audio to Analog Adapter GTV-DIGAUD-2-AAUD User Manual gefentv.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday, Pacific Time Write To: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefentv.com support@gefentv.com Notice Gefen LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connection the Digital Audio to Analog Adapter 6 Wiring Diagram 7 Operating the Digital Audio to Analog Adapter 8 Specifications 9 Warranty
INTRODUCTION Congratulations on your purchase of the GefenTV Digital Audio to Analog Adapter. Your complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware.
OPERATION NOTES THIS PAGE LEFT INTENTIONALLY BLANK 2
FEATURES Features • Converts S/PDIF or TOSLink digital audio signals to analog L/R audio • Digital interpolation filter and digital-to-analog converter (DAC) • Accepts uncompressed digital audio as input • Samples at 32, 44.1, 48 and 96 KHz • 2-channel LPCM (Linear Pulse Code Modulation) • 24-bit S/PDIF incoming bitstream on left and right channels • Compact and easy to install Package Includes (1) Digital Audio to Analog Adapter (1) 3 ft.
PANEL LAYOUT Top 1 Front 2 3 Back 4 5 Side 7 6 4
PANEL DESCRIPTIONS 1 Power Indicator This LED indicator will glow bright red once the included 5V DC power supply has been connected between the Digital Audio to Analog Adapter and an available electrical outlet. 2 Out L Connect an RCA cable from this port to the left channel input of the A/V device. 3 Out R Connect an RCA cable from this port to the right channel input of the A/V device. 4 In Coax Connect a coax cable from the digital audio source to this S/PDIF port.
CONNECTING THE DIGITAL AUDIO TO ANALOG ADAPTER How to Connect the Digital Audio to Analog Adapter 1. Connect an Optical and/or Coax cable from the audio source(s) to the Digital Audio to Analog Adapter. IMPORTANT: Before connecting the included optical cable between the audio source and the Digital Audio to Analog Adapter, be sure to remove the clear plastic protective cover on both end of the TOSLINK™ connectors as shown in the photos below.
OPERATING THE DIGITAL AUDIO TO ANALOG ADAPTER Switching between Optical and Coax Switching to the Optical (TOSLINK™ ( ) input • Slide the Optical / Coax switch to the far left as shown in the photo below: Switching to the Coax (S/PDIF™ ( ) input • Slide the Optical / Coax switch to the far right, as shown below: 7
SPECIFICATIONS Digital Audio Inputs...................................................... (1) TOSLINK™, (1) S/PDIF Analog Audio Outputs ................................................................ (1) L+R RCA-type Distortion................................................................................... < 0.001% @ 1 kHz SNR............................................................. > 90 dB (20 Hz - 20 kHz, A-weighted) Power Supply.....................................................................
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Rev A2 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefentv.com Pb This product uses UL or CE listed power supplies. fax: 818-772-9120 support@gefentv.