Operation Manual

17
GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Network key /
Confirm network key
When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s
required to input a set of ‘passphrase’ to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
EAP TYPE /
Tunnel / Provision
Mode
When authentication type is any of 802.1X, you have to
select EAP type, tunnel, and provision mode from dropdown
menu. This setting must be identical with your 802.1x
authentication server.
Username /
Identity / Domain /
Password
Please input 802.1x related authentication information
here.
Certificate
If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from
dropdown list.
PAC
Check this box and PAC (Privilege Access Certificate) will
be automatically selected.
Please click ‘OK’ when ready.
5. Network card will attempt to connect to access point now, this may
require few seconds to minutes, please be patient. When the ‘Status’
become ‘Associated’ , your computer is connected to access point you
selected. Click ‘Close’ to close configuration menu.