Operation Manual

GEMBIRD EUROPE B.V. http://www.gembird.eu

All brands and logos are registered trademarks of their respective owners

WNP-UA300P-01

HIGH POWER USB WIFI ADAPTER

the wireless access point you wish to establish a secure connection -

just three simple steps!

For older wireless access points, it’s possible to perform a firmware

upgrade to become a WPS-enabled access point. Since they may not

have a hardware button to press for WPS setup, you can use an

alternative WPS setup method - input the pin code. Every WPS-

compatible wireless network card support pin code configuration

method; you can just input the code to wireless access point, and the

wireless access point and wireless network card will do the rest for you.

This wireless network card is compatible with WPS. To use this

function, the wireless access point you wish to connect to must support

WPS function too. Now, please follow the following instructions to

establish secure connection between WPS-enabled wireless access

point and your wireless network card.

This wireless network card supports 2 kinds of WPS: PIN code and

Push-Button.

Please follow the following instructions to setup WPS:

1. Right-click Client configuration utility icon, and click ‘Open Config

Utility’.