ACC-60-L Accushine 60 W DAYLIGHT COB LED MONOLIGHT USER MANUAL
THANK YOU FOR CHOOSING GENARAY Accushine INTRODUCTION The Genaray Accushine is a compact yet extremely powerful daylight-balanced COB LED that boasts 12,900 lux of flicker-free and color-accurate light that’s perfect for video shoots. The 5600 K light simulates or matches bright sunlight conditions, and dimming from 10% to 100% in 1% increments lets you fine-tune your output to the ideal level.
· Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · Images are for illustrative purposes only. Precautions PRECAUTIONS · Do not stare directly at the lights when they are powered on.
Control panel PRODUCT OVERVIEW LED screen Power switch Dimmer/Channel select knob Umbrella mounting hole Angle adjustment knob 5/8 in.
Bowens mount release button Product Overview Mounting handle AC power input Bowens S-type mount 7 in. reflector 5/8 in.
CONTENTS INCLUDE · Light fixture · 7 in. reflector Contents · AC power cord · User manual MOUNTING THE ACCUSHINE ATTACHING THE REFLECTOR The Accushine features an integrated Bowens S-mount to attach the reflector and other Bowens-compatible accessories such as grids and snoots. 1. Align the reflector’s mounting pegs with the slots on the Bowens mount, and insert them into the mount. 2. Turn the reflector clockwise until it clicks into place.
ADDING AN UMBRELLA The Accushine can be powered directly from an AC outlet. Make sure the umbrella hole in the reflector is aligned with the umbrella mounting hole in the handle. Connect the AC power cable to the Accushine, and plug it into an outlet. To turn on the fixture, move the power switch to the ON position. Instructions POWERING THE ACCUSHINE Loosen the umbrella locking knob, and slide the umbrella’s shaft through the reflector and the handle’s mounting hole.
REPLACING THE FUSE Instructions The Accushine comes with a 5 A, 250 V fuse installed. To replace the fuse, follow these steps: 3. Take the spare fuse out of the enclosed side of the case and place it in the fuse clip. 1. Insert a small slotted screwdriver into the slot and open the fuse compartment. 4. Press the fuse case back into the fuse compartment until it clicks into place. 2. Remove the fuse case from the compartment. Then remove the spent fuse from the open-ended side of the case.
USING THE MB-WRT WIRELESS TRANSMITTER You can adjust brightness and color temperature on multiple lights that are all set at different values. This makes the MB-WRT a convenient tool for use in a sophisticated lighting setup. Refer to the MB-WRT user manual to set the channel on the transmitter. Important Make sure the channel on the Accushine matches the MB-WRT. Instructions The MB-WRT Wireless Transmitter (sold separately) adjusts brightness from 100% to 10%.
PRODUCT SPECIFICATIONS Specifications Light Fixture Connectors LED Chip Type: COB Power Input Connector: 3 prong Beam Angle: 120° without reflector 55° with reflector Mounting Color Temperature: 5600 K Color Accuracy Standard: CRI: 95.9 TLCI: 98 Cooling System: Fan cooled Dimming: Yes, 10% to 100% (1% increments) Display: LCD Housing Material: ABS plastic Fixture Mount: 5/8 in.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1