BLT-60 / BLT-60B Torpedo PORTABLE FOCUSING LED USER MANUAL
THANK YOU FOR CHOOSING GENARAY The Genaray Torpedo is a great choice for photographers and videographers who need a powerful and focusable beam from a compact, portable source. This advanced light is perfect for BLT-60 / BLT-60B INTRODUCTION events that are usually shot on location, such as weddings and meetings. The Torpedo’s COB LED technology offers a high-powered beam from a small array that eliminates the multiple shadows that are common in LED lighting.
PRECAUTIONS · Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · All images are for illustrative purposes only. PRECAUTIONS · Do not stare directly at the lights when they are powered on. · Use only the correct, recommended voltage.
Focusing ring Heat vents LED array PRODUCT OVERVIEW Locking knobs Yoke Umbrella locking knob Barndoors Umbrella mount 5/8 in.
PRODUCT OVERVIEW Battery terminals Battery slot 3-pin mini XLR power input Battery release button Filters (×4) Diffusers (×2) Lens D-tap cable AC adapter and power cord Torpedo Portable Focusing LED - USER MANUAL 5
ATTACHING THE BARNDOORS INSTRUCTIONS Align the barndoors with the front of the Torpedo, and screw them on until they’re secure. Note The barndoor fixture should easily screw onto the light. Don’t use force if it seems hard to turn, because you can damage the threads. Unscrew the barndoors, and then realign them and screw them in again. If you remove the lens for any reason, you can replace it by fitting it into the Torpedo with the textured side facing in toward the LED.
AC Power Battery Power Important: The Torpedo is a multivoltage fixture capable of running on 120 to 240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately). The Torpedo will operate with two different types of batteries. Attach the power adapter cord to the power input socket. Make sure the unit is turned off.
OPERATING THE TORPEDO INSTRUCTIONS Using the Barndoors Adjusting the Light Unfold the barndoors to shape the beam and prevent light spill. With the light turned on, press the up and down buttons to adjust the brightness from 1% to 100%, in 1% increments. Using a Diffuser or Filter The Torpedo comes with two diffusers of different densities and three colored filters. To insert a diffuser or filter, follow these steps: 1. Unscrew the barndoors from the focusing ring. 2.
Mounting an Umbrella The Torpedo has an integrated Fresnel-style lens that focuses the angle of the beam from a 15° spot to a 75° flood. An integrated umbrella mount in the Torpedo’s yoke accepts an umbrella that has a standard 8 mm shaft. Turn the focusing ring to adjust the beam angle to the desired width. 1. Insert the umbrella’s shaft through the umbrella mount. INSTRUCTIONS Adjusting the Fresnel Lens 2.
RECOMMENDED ACCESSORY Bowens Mount Adapter INSTRUCTIONS The BLT-60BA Bowens adapter ring screws onto the Torpedo and lets you attach lightshaping tools with Bowens-style S-mounts, such as softboxes, diffusers, and globes.
Light Source: 60 W COB LED array Light Intensity (lx) @ 3 ft: Lamp Life: 50,000 hr. BLT-60: 1 5°: 12026 lx (5600 K) 75°: 4131 lx (5600 K) Beam Angle: 15° to 75° Color Temperature: BLT-60: 5600 K BLT-60B: 3200 to 5600 K CRI: BLT-60: ≥95 BLT-60B: 1 5°: 9260 lx (5600 K), 8310 lx (4400 K), 7760 lx (3200 K) 75°: 3550 lx (5600 K), 3080 lx (4400 K), 2830 lx (3200 K) BLT-60B: >96 (3200 K), 95 (5600 K) Working Voltage: AC: 100 to 240 V, 50/60 Hz DC: 7.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.