Product Manual
Table Of Contents
- Section 1: Safety Rules & General Information
- Section 2: General Information and Setup
- A complete specification sheet is included in the documentation provided with the unit at the time of purchase. For additional copies, contact your nearest authorized dealer, or contact Generac Customer Service at 1-888- 436-3722 (1-888-GENERAC), or ...
- Emissions
- Remove Contents from Carton
- Installing Brush Deck
- Removing Brush Deck
- Maintenance Meter Installation
- Adding Oil
- Adding Fuel
- Checking Tire Pressure
- Connecting Battery Cable
- Handlebar Height Adjustment
- Deck Pivot Bolt Check/Adjustment
- Steering Brake Burnishing
- Blade Clutch Burnishing
- High Altitude Replacement Kit
- Section 3: Operation
- Operation and Use Questions
- Controls and Symbols
- Before Starting Engine
- Starting Unit
- Engaging Wheel Drive
- Engaging Mower Blade
- Disengaging Mower Blade
- Stopping the Engine
- Operating Steering Brakes
- Steering wit h Brake Assist
- Traction Control with Brakes
- Setting Parking Brake
- If Mower Gets Stuck
- Mowing on Slopes
- Deck Pivot Bolt Adjustment for Aggressive Mowing Conditions
- This page intentionally left blank.
- Section 4: Maintenance and Troubleshooting
- Maintenance
- Operating the Maintenance Meter
- Air Filter Maintenance
- Changing Engine Oil and Filter
- Servicing Spark Plug
- Idler Arm Lubrication
- Cable Lubrication
- Adjusting Traction Drive Cable
- Adjusting Shift Cables
- Replacing Drive Belt
- Removing Wheels
- Replacing Mower Blade
- Replacing the Mower Blade Pulley
- Adjusting Brake Cables
- Adjusting Brake Pads
- Adjusting Caliper Alignment
- Battery Care
- Troubleshooting
Part No. 10000024569 Rev. A 05/01/18
©2018 Generac Power Systems, Inc.
All rights reserved
Specifications are subject to change without notice.
No reproduction allowed in any form without prior written
consent from Generac Power Systems, Inc.
Generac Power Systems, Inc.
S45 W29290 Hwy. 59
Waukesha, WI 53189
1-888-GENERAC (1-888-436-3722)
www.generac.com