User's Manual

c. The GoBook MR-1 and battery should be stored in a cool, dry location.
3. When storing Li-Polymer or Li-Ion battery packs for extended periods, consider these factors
a. Fully charged Li-Polymer or
Li-Ion battery packs deteriorate faster than partly discharged ones. For
ideal storage, charge the packs to 100% and then discharge them to a 40% charge before storage.
b. Do not allow stored Li-Polymer or Li-Ion packs to discharge completely, as this may permanently
damage them. Stored packs should be recharged to 40% capacity every six (6) months.
c. Storing packs at temperatures near 0°C (32°F) slows down self-discharge and battery aging; packs that
are stored for a long period should be kept at low temperatures where practical.
NOTE
Store batteries as close to 0°C (32°F) as practical without allowing the batteries to freeze or reach 0°C
(32°F).
d. If you store battery packs at normal ambient temperatures, use the following charge policy to maintain
battery pack condition –
i. Store batteries within the temperature range of 15°C to 30°C (59°F to 86°F).
ii. Charge installed packs every 5 days to maintain their charge capacity.
iii. Charge uninstalled packs every six (6) months to 100%, then discharge to 40% and return to
storage.
Troubleshooting
These are basic troubleshooting tips. For more complete help with troubleshooting, see the section at the end of this
Help file.
1. Battery Power – Battery does not charge
2. Battery Power – short run time
3. Lock-ups
a. Determine if the touchscreen, touchpad or keyboard inputs are recognized.
b. Attempt to close any programs that are not responding (press the
Ctrl+Alt+Del
key and click on the
Task Manager
button).
c. If Task Manager does not list any suspect programs/applications, perform a reboot.
d. Restart applications and try the specific operation again.
e. If the Shut down Menu does not respond, press and hold the power button for approximately 10 seconds
to perform a forced shutdown. NOTE Any unsaved data will be lost when using this shutdown method.
f. Power on, boot to Windows, and restart the RF applications, if this does not resolve the problem image
corruption is likely. Re-image the GoBook MR-1 and try again.
4. RF Communications
Pa
g
e 11 of 90GoBook M
R
-1
6/18/2008file://C:\Documents and Settin
g
s\harwoodm\Local Settin
g
s\Tem
p
\~hh96AE.htm