User's Manual

The Security Menu
You can set, change or remove passwords in the Security menu.
Field Setting Description
All USB
Controllers
Enabled
Disabled
Enables/Disables all USB Controller Functions.
USB Devices for
Expansion Module
Enabled
Disabled
Enables/Disables all USB Controller Functions for
the Expansion Module.
USB 2.0 Controller
Enabled
Disabled
Enable/Disable USB 2.0 support.
Legacy USB
Support
Enabled
Disabled
Enables/Disables support for the Expansion Module
Field Setting Function
Set User
Password
Enter New
Password
Confirm
New
Password.
The User Password controls access to the system
at boot. The Password can be removed or changed
by pressing enter on this field and entering the
current password, then pressing enter to move
though the fields entering a new password, or
leaving it blank to remove the password. This
password can only be entered if the Supervisor
has entered a password first.
Set Supervisor
Password
Enter New
Password
Confirm
The Supervisor Password controls access to the
Setup Utility. The password must be entered and
confirmed. The Password can be removed or
changed by pressing enter on this field and
entering the current password, then pressing enter
Pa
g
e 62 of 90GoBook M
R
-1
6/18/2008file://C:\Documents and Settin
g
s\harwoodm\Local Settin
g
s\Tem
p
\~hh96AE.htm