Operation Manual

The Problem Solver (continued)
PROBLEM
POSSIBLE CAUSE AND REMEDY
W~NKLING IN
● Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued)
● Failure to use fabric softener. Proper use of fabric softener will minimize wrin~ing.
To remove wrinkles:
● Retumble on’ “Permanent Press” setting.
● Rerinse and dry on “Permanent Press” setting,
● If unsuccessful, retumble on normal temperature for 10-12 minutes and hang
immediately.
● Iron carefully.
● Send to dry cleaners for pressing.
● Some wrinties may remain which cannot be removed?
*NmE: If You follow good laundry procedures and Permanent Press clothes still come
out
wrin~ed, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer Center”
8W.6262W
consumer information service
12