Specification Sheet

 Density: 8.47 +/- 0.2 lbs.
 Weight Solids: 30.0 - 32.0%
 Volume Solids: 28.5 - 30.5%
 Viscosity: 40 - 50 seconds
 Method: Ford #4 @ 77 F.
 pH: 7.0 - 8.0
 V.O.C.: 140 g/l ( 1.17 lbs/gal)
excluding water
 % VOC: 4.5%
 V.O.C. Supplied: 45 g/l (0.38 lbs/gal)
 % HAPS: 0%
 Storage: Protect from Freezing
 Pass KCMA: Yes
Container: Gals, Pails, & Drums
Sheen: Not Applicable
Dry Time @ 70
O
F and 50% R.H:
 Dry: 10 - 30 minutes
 To Sand: 30 minutes -2 hours
 To Topcoat 30 minutes -2 hours
Classification:
Water Based Pre-Catalyzed Sanding Sealer
Product Description:
Enduro Pre-Cat Sanding Sealer is a high quality sanding
sealer that provides excellent protection for demanding
wood applications such as kitchen cabinets and commer-
cial furniture. Designed as a sanding sealer and base coat
for Pre-Cat Urethane, it provides excellent adhesion, water
and chemical resistance. Pre-Cat Sanding Sealer is high
solids, penetrates the grain of the wood and dries rapidly
to form a hard, durable base coat. It sands easily with
minimum effort without clogging paper.
Enduro Pre-Cat Acrylic is non flammable, low odor, and
cleans up with soap and water. Its excellent chemical, wa-
ter, and abrasion resistance makes it suitable for applica-
tions that require KCMA protocol.
General Finishes ENDURO CROSSLINKER may be added
to Pre-Cat Sanding Sealer if increased properties are war-
ranted.
Application:
HVLP: Accuspray Guns recommended. Use a 0.043” -
0.051” (1.1—1.3 mm) nozzle / tip assembly & Medium Air
Cap. Airless: 0.009”—0.011” tip. Allow 30 minutes -2
hours dry before sanding (temperature / humidity depend-
ent). Sand with #220 micron or finer between coats. 1—2
coats recommended.
General Finishes, 2462 Corporate Circle, East Troy, WI 53120
800.783.6050 (F) 262.642.4707
www.generalfinishes.com
The industry leader in water based technology.
CLEAR POLY
ENDURO
Classification:
Water Based Polyurethane Finish
Product Description:
Enduro CLEAR POLY is a high performing commercial
grade topcoat fortified with polyurethane that delivers a
very tough, durable, and abrasion resistant finish. Enduro
CLEAR POLY builds exceptionally well. Designed for inte-
rior use on furniture, cabinets, & millwork, it exhibits ex-
cellent water and chemical resistance. Clear Poly dries
rapidly, and produces a smooth, beautiful finish.
Enduro CLEAR POLY is VOC-Compliant, low odor, non-
flammable, and will clean-up with soap and water. It is
self-sealing, however General Finishes Enduro Sealer is
recommended to provide optimum finish quality.
General Finishes Enduro Crosslinker may be added if ad-
ditional chemical, water, & abrasion resistance is required.
Application:
HVLP: Use a 0.043” (1.1 mm) nozzle / tip assembly & me-
dium air cap. Air-Assisted Spray: 0.009”—0.013” tip, 300 –
600 psi fluid pressure, 10—30 psi air pressure. Allow 30
minutes -2 hours dry before sanding (temperature / humid-
ity dependent). Sand with #220 micron (320 grit) or finer
between coats. 2 - 4 coats recommended.
Product Data:
 Density: 8.6 +/- 0.2 lbs.
 Weight Solids: 29—31%
 Volume Solids: 27—29%
 Viscosity: 40 - 50 seconds
Method: Ford #4 @ 77 F.
 pH: 7.5 - 8.5
 V.O.C.: 257 g/l ( 2.14 lbs/gal)
(Excl. water)
 Material V.O.C: 94 g/l (0.78 lbs/gal)
 % VOC: 9%
 Theo. Coverage: 450 sq. ft./gal @ 1MDFT
 Pass KCMA: Yes
 Storage: Protect from Freezing
Container:
Gallons, 5-gal Pails, and 55-gal Drums
Color Matching:
Available
Sheen:
Flat (10), Satin (30), Semi-Gloss (50),
Gloss (80)
Dry Time 72
O
F and 50% R.H:
 Dry: 10 - 30 minutes
 To Sand: 30 minutes—2 hours