Conforms to HCS 2012 - United States and Canada WHMIS 2015 SAFETY DATA SHEET Queenstown Gray Milk Paint Section 1. Identification GHS product identifier Product code Other means of identification Product type : Queenstown Gray Milk Paint : Not available. : Not available. : Liquid. Relevant identified uses of the substance or mixture and uses advised against Identified uses : Water-based coating. Manufacturer : General Finishes 2462 Corporate Circle East Troy, WI 53120 U.S.A. Phone no.
Queenstown Gray Milk Paint Section 2. Hazards identification Hazards not otherwise classified : None known. Section 3. Composition/information on ingredients Substance/mixture Other means of identification : Mixture : Not available. Ingredient name % CAS number Titanium dioxide Propane-1,2-diol (2-Methoxymethylethoxy)propanol Carbon black, respirable powder Crystalline silica, respirable powder ≥1 - <2.5 ≥1 - ≤3 ≥1 - ≤3 ≥0.3 - <1 ≤0.
Queenstown Gray Milk Paint Section 4. First aid measures Eye contact Inhalation Skin contact Ingestion : : : : No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. No known significant effects or critical hazards. Indication of immediate medical attention and special treatment needed, if necessary Notes to physician : Treat symptomatically.
Queenstown Gray Milk Paint Section 6. Accidental release measures Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Methods and materials for containment and cleaning up Spill : Stop leak if without risk. Move containers from spill area. Approach release from upwind.
Queenstown Gray Milk Paint Section 8. Exposure controls/personal protection Carbon black, respirable powder Crystalline silica, respirable powder TWA: 600 mg/m³ 10 hours. STEL: 150 ppm 15 minutes. STEL: 900 mg/m³ 15 minutes. OSHA PEL (United States, 6/2016). Absorbed through skin. TWA: 100 ppm 8 hours. TWA: 600 mg/m³ 8 hours. NIOSH REL (United States, 10/2016). TWA: 3.5 mg/m³ 10 hours. TWA: 0.1 mg of PAHs/cm³ 10 hours. OSHA PEL (United States, 6/2016). TWA: 3.5 mg/m³ 8 hours.
Queenstown Gray Milk Paint Section 8. Exposure controls/personal protection Crystalline silica, respirable powder Appropriate engineering controls Environmental exposure controls TWAEV: 3.5 mg/m³ 8 hours. CA Ontario Provincial (Canada, 7/2015). TWA: 3 mg/m³ 8 hours. Form: Inhalable fraction CA Saskatchewan Provincial (Canada, 7/2013). STEL: 7 mg/m³ 15 minutes. TWA: 3.5 mg/m³ 8 hours. CA British Columbia Provincial (Canada, 7/2016). TWA: 0.025 mg/m³ 8 hours.
Queenstown Gray Milk Paint Section 9. Physical and chemical properties Appearance Physical state Color Odor Odor threshold pH Melting point Boiling point Flash point Evaporation rate Flammability (solid, gas) Lower and upper explosive (flammable) limits Vapor pressure Vapor density Relative density Solubility Partition coefficient: noctanol/water Auto-ignition temperature Decomposition temperature Viscosity VOC content Flow time (ISO 2431) : : : : : : : : : : : Liquid. [Viscous.] Gray. Not available.
Queenstown Gray Milk Paint Section 11.
Queenstown Gray Milk Paint Section 11. Toxicological information Ingestion : No known significant effects or critical hazards. Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : No known significant effects or critical hazards. effects Potential delayed effects : No known significant effects or critical hazards. Long term exposure Potential immediate : No known significant effects or critical hazards.
Queenstown Gray Milk Paint Section 12. Ecological information Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Queenstown Gray Milk Paint Section 15. Regulatory information Clean Air Act Section 602 Class II Substances : Not listed DEA List I Chemicals (Precursor Chemicals) : Not listed DEA List II Chemicals (Essential Chemicals) : Not listed SARA 302/304 Composition/information on ingredients No products were found. SARA 304 RQ : Not applicable.
Queenstown Gray Milk Paint Section 15. Regulatory information CEPA Toxic substances Canada inventory (DSL NDSL) : None of the components are listed. : At least one component is not listed. Section 16. Other information Procedure used to derive the classification Classification CARCINOGENICITY - Category 1A Justification Calculation method History Date of issue mm/dd/yyyy Date of previous issue Version Prepared by : : : : 01/15/2018 11/30/2016 3 KMK Regulatory Services Inc.